The ZelenTech I-Series is a new range of insert Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) developed in-house

The I-Series is inserted vertically into large lines through a 2 inch or 3 inch nozzle.

For smaller pipes also check out the F-Series and the new S-Series of water cut meters.

The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.

Inherits functionality and safety from the F-Series.
Fully Blow-Out Proof Safe design.
Up to ANSI Class 1500 or 250 barg.
Retractable.
Retractable under pressure.
NEL, ATEX or GOST certifications available.

ZT-100 I-Series

ZelenTech ZT-100 Watercut Meters (BS & W, OWM)

Features

Automatic Temp Comp
Optional Density Comp
HART + Modbus available
PC Interface

Certifications

ATEX EXD
GOST EXD
US/CAN EXD

Deprecated: strlen(): Passing null to parameter #1 ($string) of type string is deprecated in /home4/zelentec/public_html/website_e665a57f/site/assets/cache/FileCompiler/site/modules/ProFields/FieldtypeTable/FieldtypeTable.module on line 728

Deprecated: strlen(): Passing null to parameter #1 ($string) of type string is deprecated in /home4/zelentec/public_html/website_e665a57f/site/assets/cache/FileCompiler/site/modules/ProFields/FieldtypeTable/FieldtypeTable.module on line 728

Deprecated: strlen(): Passing null to parameter #1 ($string) of type string is deprecated in /home4/zelentec/public_html/website_e665a57f/site/assets/cache/FileCompiler/site/modules/ProFields/FieldtypeTable/FieldtypeTable.module on line 728

Deprecated: strlen(): Passing null to parameter #1 ($string) of type string is deprecated in /home4/zelentec/public_html/website_e665a57f/site/assets/cache/FileCompiler/site/modules/ProFields/FieldtypeTable/FieldtypeTable.module on line 728

I-Series General Data

Parameter	Value
Principle of Operation	High Frequency Digital Capacitance
Resolution (Low Range)	0.001%
Accuracy (Low Range)	0.01%
Resolution (High Range)	0.05%
Accuracy (High Range)	0.05%
Repeatability	0.01% Absolute
Max Water (Low Range)	25%
Max Water (High Range)	100%
Temp Compensation Range	>0°C – 180°C

I-Series Specification

Parameter	Value
Response time	1 sec
Sensitivity	0.01%
Repeatability	0.1%
Output	4-20mA + HART
Power Supply	24VDC (Loop Powered)
Power Consumption	0.66W Max
Temperature (Media)	+150° C (250 with High Temp Option)
Temperature (Ambient)	+60° C
Ingress Protection	IP66 / Nema 4X & 7
Measurement Range	0-25% or 0-100%
Pressure Rating	Up to Class 1500#
Probe entry nozzle sizes	2 inch or 3 inch
Line Sizes Nominal Sizes	From 12 inch to 42 inch
Material (Standard)	316L (Optional Duplex, Monel or other steels)
Seals and electrical insulators	PEEK

I-Series Mechanical Data

Parameter	Value
Wetted Steel Material	316L Standard (More exotic materials available)
Seals	PEEK
Max. Working Pressure	Up to Class 1500#
Max. Fluid Temperature	180°C Standard (240°C Optional)
Max. Ambient Temperature	65°C
Process Connection	ANSI, DIN

The ZT-100 is available with a variety of certifications to suit different locations

ETL US/CAN

EXD Class 1, Division 1

ATEX

II 2 GD Ex d IIC T6÷T4 - Ex tD A21 IP 66/67 T85°C ÷ T135°C

GOST

Certified GOST EXD (Russia)

I-Series Configurations and Features

Flanged Insertion Models:

Fits in 2 inch or 3 inch nozzles
ANSI or DIN Flange
Raised Face or RTJ Flange
Insertion into lines from 12 inch to 48 inch
Compatible with any Piping Specification

Measurement Ranges:

Low Range 0-25%
Mid Range 0-65%
High Range 0-100%

Design Features:

Blow-Out Proof Self-Jamming
Low Flow distortion
2-wire Loop powered
Temperature Compensation
Optional Density Compensation
Retractable

The ZelenTech I-Series is a new range of insert Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) developed in-house